NX NC Postprocessor Library

Disclaimer: These post processor files are examples set up for the machine and controllers specified and are intended for modification with NX Post Builder in order to suit your specific requirements.  In each case it is your responsibility to ensure that the post processors and any associated data downloaded from this library, including those marked as "in production", have been edited and tested as necessary to ensure that the output is correct for use on your specific machine tool.
Your downloading and use of the post processor files is subject to the confidentiality provision of the license agreement pursuant to which you obtained NX Post Builder. By downloading and using the post processor files, you acknowledge and agree that you have exclusive control over the input of data and any output generated as a result of your use of the files. You bear sole responsibility for the adequacy and adequacy of the data output, including any reliance thereon by yourself or any third party.
We would like feed-back on your use of these posts and, if you have questions in respect of one of the posts from this library then GTAC may be able to provide some assistance.   If you want to modify an NX post processor and don't have access to NX Post Builder, please contact UGS GTAC for further information on access to this software or alternative customization options. 
If you modify a post processor from the library, or create your own using NX Post Builder, you are encouraged to contribute it for inclusion in this library.
Instructions to download
cam_express
Customer Postprocessor Library 1. Use your browser find function to search for a post
2. Click on the name to see the files required for each post.
3. Right click each file and "Save target as" on your local system.
Instructions to contribute a post processor, simulation-driver or 3D-model:
1. Download and fill out this form
2. Upload a ZIP-file with all relevant data to the Scratch area
3. Send the form via mail to gtac_post_library@ugs.com
Postprocessors
Name Type Axes Machine Manufacturer Machine Model Control Manufacturer Control Model Units Post Builder Machine Testing Comments
4ax_horiz_baxis Mill 4 None Fanuc in 3 None Demo post for 4 axis (B) horizontal with Fanuc controller
4ax_vert_aaxis Mill 4 None Fanuc in 3 None Demo post for 4 axis (A) Vertical with Fanuc controller
                     
Agie_2axis_wedm_in Wire 2 None Agie in 3.3 None
Agie_2axis_wedm_mm Wire 2 None Agie mm 3.3 None
Agie_4axis_wedm_in Wire 4 None Agie in 3.3 None
Agie_4axis_wedm_mm Wire 4 None Agie mm 3.0.1 Production
Agie_4axis_wedm_mm Wire 4 None Agie mm 3.3 None
Agie_4axis_wedm_mm Wire 4 Agie CNC 100 Agie mm 3.2 Production
Agie_4axis_wedm_mm Wire 4 Agie DEM 250 Agie mm 3.2 Production
Amera_Seiki_VB3 Mill 3 Ameri Seiki VB3 Fanuc 21 in None
American_Uniturn Lathe 2 None None Fanuc OT in 5.0.0 None
American_Uniturn_2 Lathe 2 None None Fanuc 15T in 5.0.0 None
Aristo_Plotter Plotter 2 Aristo in None Production
                     
Bostomatic_3axis_mill_in Mill 3 Bostomatic Bostomatic in 3.3 None
Bostomatic_3axis_mill_mm Mill 3 Bostomatic Bostomatic mm 3.3 None
Bostomatic_4axisA_H_mill_in Mill 4A_H Bostomatic Bostomatic in 3.3 None
Bostomatic_4axisA_H_mill_mm Mill 4A_H Bostomatic Bostomatic mm 3.3 None
Bostomatic_4axisA_T_mill_in Mill 4A_T Bostomatic Bostomatic in 3.3 None
Bostomatic_4axisA_T_mill_mm Mill 4A_T Bostomatic Bostomatic mm 3.3 None
Bostomatic_5axis_in Mill 5HT Bostomatic Bostomatic 3200 in 2.0 Some
Bridgeport_VMC Mill 3 Bridgeport VMCI Heidenhain TNC410 mm 3.3 None
Bridgeport_knee_mill Mill 3 Bridgeport Boss Unknown Unknown in 3.0.1 Some
Bridgeport_412 Mill 2 Bridgeport 412 Heidenhain Unknown in Unknown None
Bridgeport_XV710 Mill 4 Bridgeport XV710 Fanuc 0M in 5.0.0 Some
Burgmaster_VTC330L Mill 3 Burgmaster VTC330L General Electric 1050MC in 5.0.0 Some
                     
Charmilles_2axis_wedm_in Wire 2 None Charmilles in 3.3 None
Charmilles_2axis_wedm_mm Wire 2 None Charmilles mm 3.3 None
Charmilles_4axis_wedm_in Wire 4 None Charmilles in 3.3 None
Charmilles_4axis_wedm_mm Wire 4 None Charmilles Robifil 440 mm 3.1 Production
Charmilles_4axis_wedm_mm Wire 4 None Charmilles mm 3.3 None
Charmilles_Drill_mm Mill 3 None Charmilles mm 2.0.1 Production
Cincinatti_20vc_acra900_mill Mill 3 Cincinnati Acramatic 900 in 3.3 Production
Cincinatti_Acramatic_3axis_mill_in Mill 3 Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_3axis_mill_mm Mill 3 Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_4axisA_H_mill_in Mill 4A_H Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_4axisA_H_mill_mm Mill 4A_H Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_4axisA_T_mill_in Mill 4A_T Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_4axisA_T_mill_mm Mill 4A_T Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_4axisB_H_mill_in Mill 4B_H Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_4axisB_H_mill_mm Mill 4B_H Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_4axisB_T_mill_in Mill 4B_T Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_4axisB_T_mill_mm Mill 4B_T Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_5axisAB_HH_mill_in Mill 5AB_HH Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_5axisAB_HH_mill_mm Mill 5AB_HH Cincinnati Lancer V5 Acramatic 2100 mm 3.4.1 Production Documentation included (Portuguese)
Cincinatti_Acramatic_5axisAB_HH_mill_mm Mill 5AB_HH Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_5axisAC_TT_mill_in Mill 5AC_TT Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_5axisAC_TT_mill_mm Mill 5AC_TT Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_5axisBC_HT_mill_in Mill 5BC_HT Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_5axisBC_HT_mill_mm Mill 5BC_HT Cincinnati Acramatic 5 mm 3.3 None
Cincinatti_Acramatic_5axisCA_HH_mill_in Mill 5CA_HH Cincinnati Acramatic 5 in 3.3 None
Cincinatti_Acramatic_5axisCA_HH_mill_mm Mill 5CA_HH Cincinnati Acramatic 5 mm 3.3 None
Cincinnati_arrow_750_in Mill 3 Cincinnati in 3.5.1 None
Cincinnati_Lamb Mill 5 Cincinnati Lamb FTV5-2500 Siemens 840D in 5.0.3 Some
Cincinnati_Lamb Mill 5 Cincinnati Lamb FTV5-1800 Siemens 840D in 5.0.3 Some
Cincinnati_Lamb Mill 5 Cincinnati Lamb FTV5-3700 Siemens 840D in 5.0.3 Some
Compumill_HMC410_Fanuc_18i Mill 4A_T Compumill HMC 410 Fanuc 18i  in Unknown None
                     
Daewoo_Puma_300LC Lathe 2 Daewoo Puma 300LC Fanuc 21iT in 5.0.3 Some
Daewoo_Puma_400_in Lathe 2 Daewoo Puma 400 Fanuc 18iT in 3.5.1 Production
Deckel_Dialog_4 Mill 3 Deckel   Dialog Dialog 4 mm 3.3 None
Deckel_Dialog_11 Mill 3 Deckel   Dialog Dialog 11 in None Production
Deckel_Maho_DMC104V Mill 3 Deckel Maho DMC 104V Heidenhain TNC530 mm 3.2 Production
Deckel_Maho_DMC360 Mill 3 Deckel Maho DMC 360 Heidenhain iTNC530 mm 3.2 Production
Deckel_Maho_DMC70V Mill 3 Deckel Maho DMC 70V Heidenhain iTNC530 in 3.5.1 None
Deckel_Maho_DMC50H Mill 4 Deckel Maho DMC 50H Sinumeric 840D in Unknown None
Deckel_Maho_DMU50 Mill 5 Deckel Maho DMU 50 Mill-Plus in None None
Deckel_Maho_DMU35M Mill 3 Deckel Maho DMU 35M Heidenhain TNC310 in None None
Deckel_Maho_DMU70_eVO Mill 5 Deckel Maho DMU 70 eVO Siemens 840D in 5.0.3 Some
Deckel_Maho_DMC63V Mill 5 Deckel Maho DMC 63V Sinumeric 810D mm None None
Deckel_Maho_DMC75V Mill 4 Deckel Maho DMC 75V Heidenhain TNC530 in Production
Deckel_Maho_DMC80_MonoBlock Mill 5 Deckel Maho DMC 80 Heidenhain iTNC530 in 5.0.0 Some MonoBlock
Deckel_Maho_DMU100_MonoBlock Mill 5 Deckel Maho DMU 100 Heidenhain MillPlus in 5.0.0 Some MonoBlock/MillPlus
Deckel_Maho_DMC160U_DuoBlock Mill 5 Deckel Maho DMC 160 Heidenhain MillPlus in 5.0.0 Some DuoBlock/MillPlus
Deckel_Maho_MH700 Mill 3 Maho MH700 Philips CNC-532 in None None
DeVlieg Mill 3 DeVlieg 120 Unknown Unknown in Unknown Some
                     
Enshu_650VX Mill 4 Enshu 650VX Fanuc 15M in 5.0.3 Some
ESAB_waterjet Waterjet 2 ESAB Auto-Path CNC-80 in 3.3 Some ESAB 2 1/2 axis Waterjet
Fadal_907-1 Mill 3 Fadal Fadal in 5.0.0 Production
Fadal_3axis_mill_in Mill 3 Fadal Fadal in 3.3 None
Fadal_3axis_mill_mm Mill 3 Fadal Fadal mm 3.3 None
Fadal_VMC_6030 Mill 4 Fadal VMC 6030 Fadal in 5.0.0 None
Fadal_4axisA_H_mill_in Mill 4A_H Fadal Fadal in 3.3 None
Fadal_4axisA_H_mill_mm Mill 4A_H Fadal Fadal mm 3.3 None
Fadal_4axisA_T_mill_in Mill 4A_T Fadal Fadal in 3.3 None
Fadal_4axisA_T_mill_mm Mill 4A_T Fadal Fadal mm 3.3 None
Fadal_4axisB_H_mill_in Mill 4B_H Fadal Fadal in 3.3 None
Fadal_4axisB_H_mill_mm Mill 4B_H Fadal Fadal mm 3.3 None
Fadal_4axisB_T_mill_in Mill 4B_T Fadal Fadal in 3.3 None
Fadal_4axisB_T_mill_mm Mill 4B_T Fadal Fadal mm 3.3 None
Fadal_5axisAB_HH_mill_in Mill 5AB_HH Fadal Fadal in 3.3 None
Fadal_5axisAB_HH_mill_mm Mill 5AB_HH Fadal Fadal mm 3.3 None
Fadal_5axisAC_TT_mill_in Mill 5AC_TT Fadal Fadal in 3.3 None
Fadal_5axisAC_TT_mill_mm Mill 5AC_TT Fadal Fadal mm 3.3 None
Fadal_5axisBC_HT_mill_in Mill 5BC_HT Fadal Fadal in 3.3 None
Fadal_5axisBC_HT_mill_mm Mill 5BC_HT Fadal Fadal mm 3.3 None
Fadal_5axisCA_HH_mill_in Mill 5CA_HH Fadal Fadal in 3.3 None
Fadal_5axisCA_HH_mill_mm Mill 5CA_HH Fadal Fadal mm 3.3 None
Fanuc_3axis_mill_in Mill 3 None Fanuc 6M in 3.3 None
Fanuc_3axis_mill_mm Mill 3 None Fanuc 6M mm 3.3 None
Fanuc_4axisA_H_mill_in Mill 4A_H None Fanuc 6M in 3.3 None
Fanuc_4axisA_H_mill_mm Mill 4A_H None Fanuc 6M mm 3.3 None
Fanuc_4axisA_T_mill_in Mill 4A_T None Fanuc 6M in 3.3 None
Fanuc_4axisA_T_mill_in Mill 4A_T Fadal VMC 4020 Fadal CNC-88 in Unknown None
Fanuc_4axisA_T_mill_mm Mill 4A_T None Fanuc 6M mm 3.3 None
Fanuc_4axisB_H_mill_in Mill 4B_H None Fanuc 6M in 3.3 None
Fanuc_4axisB_H_mill_mm Mill 4B_H None Fanuc 6M mm 3.3 None
Fanuc_4axisB_T_mill_in Mill 4B_T None Fanuc 6M in 3.3 None
Fanuc_4axisB_T_mill_mm Mill 4B_T None Fanuc 6M mm 3.3 None
Fanuc_5axisAB_HH_mill_in Mill 5AB_HH None Fanuc 6M in 3.3 None
Fanuc_5axisAB_HH_mill_mm Mill 5AB_HH None Fanuc 6M mm 3.3 None
Fanuc_5axisAC_TT_mill_in Mill 5AC_TT None Fanuc 6M in 3.3 None
Fanuc_5axisAC_TT_mill_mm Mill 5AC_TT None Fanuc 6M mm 3.3 None
Fanuc_5axisBC_HT_mill_in Mill 5BC_HT None Fanuc 6M in 3.3 None
Fanuc_5axisBC_HT_mill_mm Mill 5BC_HT None Fanuc 6M mm 3.3 None
Fanuc_5axisCA_HH_mill_in Mill 5CA_HH None Fanuc 6M in 3.3 None
Fanuc_5axisCA_HH_mill_mm Mill 5CA_HH None Fanuc 6M mm 3.3 None
Fanuc_lathe_in Lathe 2 None Fanuc 6M in 3.3 None
Fanuc_lathe_mm Lathe 2 None Fanuc 6M mm 3.3 None
Feeler_4axis_mill_mm Mill 4 Feeler FV1300 Meldas M65 mm 3.3 Production
Ferrari_3axis_mill_mm Mill 3 Fundemap Fanuc mm 3.0.1 Production
Fidia_3axis_mill_in Mill 3 None Fidia in 3.3 None
Fidia_3axis_mill_mm Mill 3 None Fidia mm 3.3 None
Fidia_5axisAC_TT_mill_in Mill 5AC_TT None Fidia in 3.3 None
Fidia_5axisAC_TT_mill_mm Mill 5AC_TT None Fidia mm 3.3 None
Fryer_MB10 Mill 3 Fryer MB10 Anilam 3000 in None
Fryer Mill 3 Fryer VB40 Anilam 6000 in Some
Fryer Mill 3 Fryer VB50 Anilam 6000 in Some
Fryer Mill 3 Fryer VB60 Anilam 6000 in Some
Fryer Mill 3 Fryer VB80 Anilam 6000 in Some
Fryer Mill 3 Fryer VB120 Anilam 6000 in Some
Fryer Mill 3 Fryer VB160 Anilam 6000 in Some
                     
Giddings_Lewis_802L Lathe 2 Giddings and Lewis 802L Numeripath in 5.0.0 None
Giddings_Lewis_TX60T Mill 4 Giddings and Lewis TX60T G&L 8000 in 5.0.3 Some
Giddings_Lewis_TX60T2 Mill 4 Giddings and Lewis TX60T Siemens 840D in 5.0.3 Some
Giddings_Lewis_RB1600 Mill 4 Giddings and Lewis RB1600 Siemens 840D in 5.0.3 Some
                     
Haas_3axis_mill_vf3 Mill 3 Haas VF3 Haas in 3.3 Production
Haas_3axis_mill_vf0_in Mill 3 Haas VF0 Haas VF in 3.5.1 None
Haas_3axis_mill_in Mill 3 Haas Haas VF in 3.3 None
Haas_3axis_mill_mm Mill 3 Haas Haas VF mm 3.3 None
Haas_4axisA_T_mill_in Mill 4A_T Haas Haas VF in 3.3 None
Haas_4axisA_T_mill_mm Mill 4A_T Haas VF2 Fanuc Unknown mm Unknown Production
Haas_4axisA_T_mill_mm Mill 4A_T Haas Haas VF mm 3.3 None
Haas_4axisB_H_mill_in Mill 4B_H Haas Haas VF in 3.3 None
Haas_4axisB_H_mill_mm Mill 4B_H Haas Haas VF mm 3.3 None
Haas_4axisB_T_mill_in Mill 4B_T Haas Haas VF in 3.3 None
Haas_4axisB_T_mill_mm Mill 4B_T Haas Haas VF mm 3.3 None
Haas_5axisAB_HH_mill_in Mill 5AB_HH Haas Haas VF in 3.3 None
Haas_5axisAB_HH_mill_mm Mill 5AB_HH Haas Haas VF mm 3.3 None
Haas_5axisAC_TT_mill_in Mill 5AC_TT Haas Haas VF in 3.3 None
Haas_5axisAB_TT_mill_mm Mill 5AB_TT Haas VF2 Fanuc Unknown mm Unknown Production
Haas_5axisAC_TT_mill_mm Mill 5AC_TT Haas Haas VF mm 3.3 None
Haas_5axisBC_HT_mill_in Mill 5BC_HT Haas Haas VF in 3.3 None
Haas_5axisBC_HT_mill_mm Mill 5BC_HT Haas Haas VF mm 3.3 None
Haas_5axisCA_HH_mill_in Mill 5CA_HH Haas Haas VF in 3.3 None
Haas_5axisCA_HH_mill_mm Mill 5CA_HH Haas Haas VF mm 3.3 None
Haas_lathe_in Lathe 2 Haas Haas VF in 3.3 None
Haas_lathe_mm Lathe 2 Haas Haas VF mm 3.3 None
Haas_VF2TR Mill 5 Haas VF_2TR Haas Unknown in Unknown None
Haas_VF_2TR Mill 5 Haas VF_2TR Haas Unknown in Unknown None
Haas_VF80 Mill 3 Haas VF80 Haas Unknown in 5.0.3 Some
Hardinge Lathe 2 Hardinge Unknown Fanuc Unknown in 5.0.3 None
Hardinge_lathe_in Lathe 2 Hardinge CHCNC1 General Numeric GN10 in Unknown None
Heidenhain_3axis_mill_in Mill 3 None Heidenhain conv in 3.3 None
Heidenhain_3axis_mill_mm Mill 3 None Heidenhain conv mm 3.3 None
Heidenhain_4axisA_H_mill_in Mill 4A_H None Heidenhain conv in 3.3 None
Heidenhain_4axisA_H_mill_mm Mill 4A_H None Heidenhain conv mm 3.3 None
Heidenhain_4axisA_T_mill_in Mill 4A_T None Heidenhain conv in 3.3 None
Heidenhain_4axisA_T_mill_mm Mill 4A_T None Heidenhain conv mm 3.3 None
Heidenhain_4axisB_H_mill_in Mill 4B_H None Heidenhain conv in 3.3 None
Heidenhain_4axisB_H_mill_mm Mill 4B_H None Heidenhain conv mm 3.3 None
Heidenhain_4axisB_T_mill_in Mill 4B_T None Heidenhain conv in 3.3 None
Heidenhain_4axisB_T_mill_mm Mill 4B_T None Heidenhain conv mm 3.3 None
Heidenhain_5axisAB_HH_mill_in Mill 5AB_HH None Heidenhain conv in 3.3 None
Heidenhain_5axisAB_HH_mill_mm Mill 5AB_HH None Heidenhain conv mm 3.3 None
Heidenhain_5axisAC_TT_mill_in Mill 5AC_TT None Heidenhain conv in 3.3 None
Heidenhain_5axisAC_TT_mill_mm Mill 5AC_TT None Heidenhain conv mm 3.3 None
Heidenhain_5axisBC_HT_mill_in Mill 5BC_HT None Heidenhain conv in 3.3 None
Heidenhain_5axisBC_HT_mill_mm Mill 5BC_HT None Heidenhain conv mm 3.3 None
Heidenhain_5axisCA_HH_mill_in Mill 5CA_HH None Heidenhain conv in 3.3 None
Heidenhain_5axisCA_HH_mill_mm Mill 5CA_HH None Heidenhain conv mm 3.3 None
Heidenhain_4axisA_T_mill_in Mill 4A_T None Heidenhain conv in 3.3 Some Modified for specific cycle parameters and arc plane format
Heller_3axis_mill_mm Mill 3 Heller Unipro II mm 3 Production
Heller_ 4axisA_T_mill_mm Mill 4A_T Heller Fagor mm 2.0.1 Production
Hermle_5axisAC_TT_mill_mm Mill 5AC_TT Hermle C600U Siemens 840D mm 3.2 Production Allows for NURBS output
Hermle_5axisAC_TT_mill_mm Mill 5AC_TT Hermle C800U Heidenhain conv mm 3.3 Production
Hermle_3axis_mill_mm Mill 3 Hermle Heidenhain TNC 425
Hitachi_supertilt_5axis_mill Mill 5TT Hitachi Seiki super tilt Fanuc conv mm Unknown Some
Homa_3axis_mill_mm Mill 3 Homa PM-002 Fagor mm 3.2 Production
Hurco_Ultimax Mill 3 Hurco Ultimax  3 mm 3.4.1 None
Hurco_3axis_fanuc_mill Mill 3 Hurco Fanuc in 3.0.1 None
Huron_KX20 Mill 3 Huron KX20 Sinumeric 840D in Production
Hwacheon_HI_EC015A Mill_Turn 4 Hwacheon HI-ECO15A Fanuc OT in Production
                     
I-MES_GPY138-248 Router 3 I-MES GPY 138/248 HMC mm 3.5.2 Production
Ingersol_5axisBC_HH_mill_mm Mill 5BC_HH Ingersol Siemens 840D mm 3.3 Some B axis is a nutating 50 deg head
                     
Jones_Lamson_TNC4515 Lathe 2 Jones and Lamson None None in 5.0.0 None  
Jones_Lamson_TNC4516 Lathe 2 Jones and Lamson in 5.0.0 None
Jungenthal_2axis_lathe_mm Lathe 2 Jungenthal Siemens 840C mm 3.2 None  
                     
Knuth Lathe 2 Knuth Starchip 450 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Starchip 520 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Starchip 630 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Compact 330 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Compact 480 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Roturn 250 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Ecoturn 520 Fanuc 0i in 6.0.0 Some
Knuth Lathe 2 Knuth Ecoturn 650 Fanuc 0i in 6.0.0 Some
Komo Router 3 Komo Series 510 Fanuc 6M in 5.0.3 Production supports multiple spindles
Komo_3X_Router Router 3 Komo Series 510 Fanuc 6M in 3.4.1 Production
KT_4axisB_T_mill_mm Mill 4B_T K&T MM200 Fanuc 18M mm 3.3 Production  
Kiwa_Excel_Fanuc_OM Mill 3  Kiwa Excel 810 Fanuc 0M in Unknown None
                     
Lagun_3axis_mill_mm Mill 3 Lagun Heidenhain mm 3.0.1 Production  
                     
Machine_distance_and_time Mill 3 None Fanuc None in None None Provides distance and time for milling operations
Makino_3axis Mill 3 Makino Unknown Fanuc Unknown in 5.0.3 None
Makino_A66 Mill 5 Makino A66 Fanuc 18 mm 3.5 Some
Makino_E33 Mill 3 Makino E33 Fanuc 18i  in 5.0.0 None
Makino Mill 3 Makino GF6 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino GF6 Fanuc Pro5 in 5.0.3 Some
Makino Mill 3 Makino GF8 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino GF8 Fanuc Pro5 in 5.0.3 Some
Makino Mill 3 Makino GF12 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino GF12 Fanuc Pro5 in 5.0.3 Some
Makino_U32K Wire 4 Makino U32K in None
Makino Mill 3 Makino S33 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino S33 Fanuc Pro5 in 5.0.3 Some
Makino Mill 3 Makino S56 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino S56 Fanuc Pro5 in 5.0.3 Some
Makino_V22 Mill 3 Makino V22 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino V22 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino V33 Fanuc Pro5 in 5.0.3 Some
Makino_v33_in Mill 3 Makino V33 Fanuc in 3.5.1 None
Makino_v33_turbo Mill 3 Makino V33 Fanuc 18 in Unknown Some
Makino_V56 Mill 3 Makino V56 Makino SGI.3 in Unknown Production
Makino Mill 3 Makino V66 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino V66 Fanuc Pro5 in 5.0.3 Some
Makino_V77 Mill 3 Makino V77 Makino SGI.3 in Unknown Production
Makino Mill 3 Makino V77 Fanuc Pro3 in 5.0.3 Some
Makino Mill 3 Makino V77 Fanuc Pro5 in 5.0.3 Some
Matsuura_MC600_H45 Mill 4A_T Matsuura MC600 Fanuc 11M in Unknown None
Matsuura_MC600_H45 Mill 4B_T Matsuura MC600 Fanuc 6M in Unknown None
Matsuura_MC760 Mill 3 Matsuura MC760 Fanuc 6M in Unknown None
Matsuura_MC800 Mill 3 Matsuura MC800 Fanuc 6M in Unknown None
Matsuura Mill 4 Matsuura 1000 Fanuc 6M in 5.0.3 Some
Matsuura Mill 4 Matsuura 600 Fanuc 6M in 5.0.3 Some
Matsuura Mill 4 Matsuura 800 Fanuc 6M in 5.0.3 Some
Matsuura_MV1500 Mill 3 Matsuura MV1500 Fanuc 11M in Unknown None
Mazak_3axis_mill_mm Mill 3 Mazak Nexus 410 Mazatrol mm 3.2 Production Includes UDE for High Speed Machining
Mazak_Nexus_510 Mill 4A_T Mazak Nexus 510 Mazatrol in 3.5.1 Production
Mazak Mill 4 Mazak Nexus 510 Mazatrol in 5.0.3 Some
Mazak_4axisB_T_mill_mm Mill 4B_T Mazak FH 680 Mazatrol mm 3.3 Production
Mazak_4axisA_T_mill_mm Mill 4A_T Mazak VTC 200 Fanuc mm 3.0.1 Production
Mazak_4axisA_T_mill_mm Mill 4A_T Mazak VTC 30 Fanuc mm 3.0.1 Production
Mazak_H630 Mill 4A_T Mazak H630 Fanuc mm 3.0.1 Some
Mazak_FNC106 Mill 4 Mazak FNC106 Mazatrol Unknown in Unknown Some
Mazak_Fusion_640MT Lathe 2 Mazak Mazatrol in 5.0.0 None
Mazak_PFH_4800 Mill 3 Mazak PFH-4800 Mazatrol 64M in 5.0.3 Production
Mazak_QT20 Lathe 2 Mazak QT 20 Fanuc mm 3.0.1 Some
Mazak_Vortex Mill 5AB_HH Mazak Vortex None
Mazak_Variaxis_630 Mill 5 Mazak Variaxis Mazatrol Unknown in Unknown Production
Mazak_Variaxis_730 Mill 5 Mazak Variaxis Mazatrol Matrix in 5.0.3 Some
Micron_HSM700 Mill 3 Micron HSM700 Atek HS Plus in None None
Mighty_Viper_VMC1200 Mill 3 Mighty Viper VMC1200 Mitsubishi Melda 520AM in Unknown None
Mikron_TNC430M Mill 5TT Mikron Heidenhain TNC430 mm Unknown Some
Mikron_WF21D_mm Mill 3 Mikron WFD21 Heidenhain TNC470 mm Unknown None
Mikron_UCP_600 Mill 5BC_TT Mikron UCP 600 Heidenhain iTNC530 mm 5.0.0 Production
Mikron_iTNC530 Mill 3 Mikron VCP1000 Heidenhain iTNC530 in 3.3 Production Duro High Speed 3 axis mill
Minimill_560_in Mill 3 Minimill 560 Siemens 810D in 3.5.1 None
Mitsubishi Lathe 2 Mitsubishi Unknown Meldas Unknown in 5.0.3 None
Mitsubishi_2axis_wedm_in Wire 2 None Mitsubishi in 3.3 None
Mitsubishi_2axis_wedm_mm Wire 2 None Mitsubishi mm 3.3 None
Mitsubishi_4axis_wedm_in Wire 4 None Mitsubishi in 3.3 None
Mitsubishi_4axis_wedm_mm Wire 4 None Mitsubishi mm 3.3 None
Mitsubishi_HMC_MH50C Mill 4B_T Mitsubishi MH50C Mitsubishi in 5.0.0 Some
Mitsubishi_VR33_in Mill 3 Mitsubishi VR33 Mitsubishi in 3.5.1 None Uses Right Angle Head
Mitsubishi_VR33_ZW_in Mill 4 Mitsubishi VR33 Mitsubishi in 3.5.1 None
Monarch_lathe Lathe 2 Monarch Fanuc 15T in 5.0.0 None
Monarch_M25 Lathe 2 Monarch M25 General Electric 1050T in 5.0.0 Some
Monarch_VMC75 Mill 3 Monarch VMC75 General Electric 550MC in 5.0.0 Some
Monarch_VMC150 Mill 3 Monarch VMC150 General Electric 1050MC in 5.0.0 Some
Moore Jig Grinder 4 Moore G18 8400 CP Allen Bradley 8000 in 5.0.3 Some
Moore Jig Grinder 4 Moore G32 Allen Bradley 8000 in 5.0.3 Some
Moore Jig Grinder 4 Moore G48 Allen Bradley 8000 in 5.0.3 Some
Mori_Seiki_AL22 Lathe 2 MoriSeiki in 3.5.2 None
Mori_Seiki_CL203B Lathe 2 MoriSeiki in 3.5.2 None
Mori_Seiki_DuraVertical_5100 Mill 3 MoriSeiki 5100 MSX 504 in 5.0.0 Some
Mori_Seiki_DuraVertical Mill 3 MoriSeiki 5100 MSX 504 mm 5.0.3 Some includes AICC controls
Mori_Seiki_NT4200_MTSK Mill_Turn 4XZC MoriSeiki NT4200 Fanuc 3.5 Some
Mori_Seiki_NH_4000 Mill 4A_T MoriSeiki NH 4000 DCG Unknown mm None
Mori_SEIKI_NH4000 Mill 4A_T MoriSeiki NH4000 MSX 711 mm 5.0.0 None
Mori_SEIKI_NH5000 Mill 4A_T MoriSeiki NH5000 MSX 711 mm 5.0.0 None
Mori_SEIKI_NH6300 Mill 4A_T MoriSeiki NH6300 MSX 711 mm 5.0.0 None
Mori_SEIKI_NH8000 Mill 4A_T MoriSeiki NH8000 MSX 711 mm 5.0.0 None
Mori_Seiki_NMV_5000 Mill 5AC_TT MoriSeiki NMV 5000 DCG Unknown in Some
MS_NMV_5000_MM Mill 5AC_TT MoriSeiki NMV 5000 DCG Unknown mm Some
Mori_Seiki_XZC_in Mill_Turn 4XZC MoriSeiki NL1500Y in 3.5.1 Some
Mori_Seiki_MV45 Mill 3 MoriSeiki MV45 Yasnac MX1 in Unknown None
Mori_Seiki_MV65 Mill 4A_T MoriSeiki MV65 Fanuc MF in Unknown None
Mori_Seiki_SL3 Lathe 2 MoriSeiki SL3 Fanuc 3T in Unknown None
Mori_Seiki_SL3 Lathe 2 MoriSeiki SL3 Yasnac LX3 in Unknown None
Mori_Seiki_SL6 Lathe 2 MoriSeiki SL6  Fanuc 11T in Unknown None
Mori_Seiki_SL65_Fanuc_MSC Lathe 2 MoriSeiki SL65 Fanuc Unknown in Unknown Production
Mori_Seiki_SL65_Fanuc_MF Lathe 2 MoriSeiki SL65 Fanuc 6T in Unknown None
Mori_Seiki_SL154_Fanuc_SMC Mill_Turn 2 MoriSeiki SL 154SMC Fanuc 18iT in Production
Mori_Seiki_SH800_in Mill 4 MoriSeiki SH800 in 3.5.1 Production
Mori_Seiki_with_shopdocs Mill 4 MoriSeiki Fanuc 16i in None This post generates shop docs.
Muratec_MT12 Mill_Turn 4 Muratec MT12 Fanuc 16T in Production
                     
Nomura_BN-130 Mill 3 None None Fanuc 6M in 3.5.2 None
                     
Pacer Router 3 Pacer K Series 2512K  XMC mm 3.5.2 Production
                     
OKK_KCV1000 Mill 5AC_TT OKK KCV1000 Fanuc 16i in 5.0.0 Some
OKK_HM80S Mill 4B_H OKK HM80S Fanuc 16i in 5.0.0 Some
Okuma Mill 5 Okuma 800VH Okuma Thinc in 5.0.3 Some
Okuma Mill 5 Okuma 1000VH Okuma Thinc in 5.0.3 Some
Okuma_lathe Lathe 2 Okuma Unknown Okuma Unknown in 5.0.3 None
Okuma_4axis_XZC_mm Mill_Turn 4XZC Okuma LT25 Okuma OSPE 100L mm 3.1 Production Includes linked 2 axis lathe post
Okuma_7000M_in Mill 4 Okuma 700M Okuma in 3.5.1 None
Okuma_2axis_lathe_mm Lathe 2 Okuma LU25 Okuma OSPE 100L mm 3.2 Production  
Okuma_5axis_BC_TT_mill_mm Mill 5BC_TT Okuma VH40 Okuma OSP 7000 MH mm 3.3 Production
Macturn_30 Mill_Turn 4 Okuma Macturn30 Sinumeric 840D in None None
Okuma_Howa_Millac_761V Mill 3 Okuma 761V Fanuc 16i in 5.0.0 Some
Ona_4axis_wedm_mm Wire 4 Ona Ona mm 3.3 Production
Ona_2axis_wedm_mm Wire 2 Ona Ona mm 3.0.1 Production
Oxi_2axis_mill_mm Mill 2 Oxi Corte Oxi Corte mm 3.0.1 Production Two axis positioning (XY) machine
                     
Roeders_RFM600_mm Mill 3 Roeders RFM 600 mm 3.5.1 None
Roeders_RFM600_in Mill 3 Roeders RFM 600 in 3.5.1 Production
RokuRoku Mill 3 RokuRoku CEGAII Fanuc 18 in 6.0.0 Some
RokuRoku_HC658 Mill 3 RokuRoku HC658 Fanuc 31i in 5.0.0 None
Romi_5axis_TT_mill_mm Mill 5BC_TT Romi Discovery 760 Romi Mach 9 mm 3.2 Production 4th and 5th axis are W and INCL=
Romi_5axis_TT_mill_mm Mill 5BC_TT Romi Discovery 4022 Romi Mach 9 mm 3.2 Production 4th and 5th axis are W and INCL=
Romi_2axis_lathe_mm Lathe 2 Romi Galaxy 10 Fanuc 21 mm 3.2 Production
Romi_2axis_lathe_mm Lathe 2 Romi UTC 55 Siemens None mm 3.2 Some
Romi_3axis_mill_mm Mill 3 Romi Discovery 560 Siemens 810D mm 3.3 Production
Romi_4axis_XZC_mm` Mill_Turn 4XZC Romi Galaxy 15 Fanuc 21 mm 3.2 Production Includes linked 2 axis lathe post
Romi_4axis_T_mill_mm Mill 4A_T Romi Discovery Romi Mach 9 mm 3.2 Production 4th axis is W
                     
Siemens_3axis_mill_mm Mill 3 None Siemens 840D mm 3.3 None
Siemens_4axisA_H_mill_in Mill 4A_H None Siemens 840D in 3.3 None
Siemens_4axisA_H_mill_mm Mill 4A_H None Siemens 840D mm 3.3 None
Siemens_4axisA_T_mill_in Mill 4A_T None Siemens 840D in 3.3 None
Siemens_4axisA_T_mill_mm Mill 4A_T None Siemens 840D mm 3.3 None
Siemens_4axisB_H_mill_in Mill 4B_H None Siemens 840D in 3.3 None
Siemens_4axisB_H_mill_mm Mill 4B_H None Siemens 840D mm 3.3 None
Siemens_4axisB_T_mill_in Mill 4B_T None Siemens 840D in 3.3 None
Siemens_4axisB_T_mill_mm Mill 4B_T None Siemens 840D mm 3.3 None
Siemens_5axisAB_HH_mill_in Mill 5AB_HH None Siemens 840D in 3.3 None
Siemens_5axisAB_HH_mill_mm Mill 5AB_HH None Siemens 840D mm 3.3 None
Siemens_5axisAC_TT_mill_in Mill 5AC_TT None Siemens 840D in 3.3 None
Siemens_5axisAC_TT_mill_mm Mill 5AC_TT None Siemens 840D mm 3.3 None
Siemens_5axisBC_HT_mill_in Mill 5BC_HT None Siemens 840D in 3.3 None
Siemens_5axisBC_HT_mill_mm Mill 5BC_HT None Siemens 840D mm 3.3 None
Siemens_5axisCA_HH_mill_in Mill 5CA_HH None Siemens 840D in 3.3 None
SNK Mill 4 SNK RB45 Fanuc 18i  in 6.0.0 None
                     
Toshiba Mill 4 Toshiba BTD-13F.R22 Tosnuc 888 in 6.0.0 Production
Toshiba Mill 4 Toshiba BTD-110H.R13 Tosnuc 888 in 6.0.0 Production
Toshiba Mill 4 Toshiba BTD-110H.R16 Tosnuc 888 in 6.0.0 Production
Toshiba Mill 4 Toshiba BTD-200QH Tosnuc 888 in 6.0.0 Production
Toshiba Lathe 2 Toshiba TUE 150 Tosnuc 888 in 6.0.0 Production
Toshiba Lathe 2 Toshiba TUE 200 Tosnuc 888 in 6.0.0 Production
Toyoda_FH55 Mill 4 Toyoda FH55 Fanuc 15M in 5.0.0 None
Trak Mill 3 Trak DPM Trak AGE-3 in 5.0.3 Some manual tool change
Treemill_3axis_mill Mill 3 Tree Dynapath in 3.2 None
Tree_Journeyman_Dynapath Mill 3 Tree Dynapath in 5.0.0 Some
T-Tech_Plotter Plotter 2 T-Tech in Production
Thermwood_Model_67 Mill 5BC_HH None
                     
Warner_Swasey Lathe 2 Warner Swasey Unknown Unknown Unknown in 5.0.3 None
Warner_Swasey Lathe 2 Warner Swasey SC-28 Fanuc 0i in 6.0.0 None
Wohlenberg_2axis_lathe_mm Lathe 2 VDF Wohlenberg THT-001 Fagor None mm 3.2 Production
Wotan_4axis_mill_mm Mill 4B_T Wotan M2L Heidenhain TNC430 mm 3.1 Production
                     
Yama_Seiki Mill 3 Yama Seiki VMB 850 Fanuc 18 in 5.0.3 Some
Yama_Seiki Mill 3 Yama Seiki VMB 1020 Fanuc 18 in 5.0.3 Some
Yama_Seiki Mill 3 Yama Seiki VMB 1200 Fanuc 18 in 5.0.3 Some
Yama_Seiki Mill 3 Yama Seiki VMB 1600 Fanuc 18 in 5.0.3 Some
YMC_SuperMax_TV2110B Mill 3 YMC TV2110B Fanuc 18 in 5.0.0 Some
                     
Zayer_5axis_mill_mm Mill 4B_T Zayer ZFG 630 Fanuc 0M mm 3.2 Production